Arducam 5MP OV5647 Pan Tilt Camera for Raspberry Pi

Description

This is an all-new pan and tilt mechanism for the 5MP OV5647 camera, which is compatible with the raspberry pi. This mechanism can move your camera in two dimensions with 180 degrees horizontal and 145 degrees vertical movements. The PTZ camera controller board outputs the PWM signals to drive the servo motors directly. Therefore, this can be used to monitor places that should be covered by multiple ones commonly in the surveillance system.

Note: Raspberry Pi shown in the image is not included you have to purchase it separately

  Download link:

1. To use this camera, it is necessary to do hardware and software setup. To do  both , please follow the instructions given in the link .

Applications:

1. IoT cameras
2. Robot cameras
3. Wildlife cameras
4. Other security and surveillance projects

Features:

1.Camera

1. Sensor: OV5647
2. Resolution: 5MP 2592H x 1944V
3. Frame Rate: 30fps@1080P, 60fps@720P
4. IR Sensitivity: Integral IR filter, visible light only
5. Field of View: 54°(H) x 41°(V)
6. Camera Board Dimension: 25mm x 24mm

2.Digital Servo

1. Torque: 0.6 kg/cm at 3.6V, 0.8 kg/cm at 4.8V
2. Operating Speed: 0.13sec/60° at 3.6V, 0.09sec/60° at 4.8V
3. Operating Voltage: 3.6v～4.8v
4. Operating Current: ＜350mA
5. Dead Band: 3 usec
6. Dimension: 20mm x 8.75mm x 22mm

3.Control Board

1. PWM Driver: PCA9685
2. PWM resolution: 12-bit
3. Ambient light sensor: TSL2581FN
4. Ambient light resolution: 16-bit
5. Communication interface: I2C
6. Operating voltage: 3.3V/5V
7. Dimension: 25mm x 61mm

Package Includes:

1 x 5MP camera for Raspberry Pi with a 15cm 15 pin camera cable for Raspberry Pi

2 x Digital servos

1 set epoxy bracket pieces with screws

1 x PWM control board

4 x Female to female jumper wires (The wire has no fixed color)

2 x Male to female jumper wires (The wire has no fixed color)