Sale!

DOIT Mini Ultra-Small size ESP-M3 Serial WiFi Module Compatible with ESP8266

(1 customer review)

266.00

  1. Derived from ESP8266, ESP8285 has a flash memory of 1MB
  2. Operating Voltage: 3.3V
  3. Totally compatible with ESP8266
  4. WiFi support 802.11 b/g/n/e/i
  5. High temperature resistant, working temperature: -40℃-125℃
SKU: RK008399 Categories: ,

Description

The WiFi module ESP-1 is manufactured by using a high-performance chip ESP8285. This small chip is encapsulated an enhanced Tensilica’s L106  Diamond series 32-bit kernel CPU with an SRAM. Thus, ESP8285 has the complete function of Wi-Fi function; it not only can be applied independent but can be used as a slave working with other host CPU. When ESP8285 is applied as a slave, it can start from the onboard Flash.

The built-in high-speed buffer is not only benefiting improve the system performance but optimizing the store system. In addition, ESP8285 can be used as a Wi-Fi adapter by SPI/SDIO or I2C/UART interface, when it is applied to other MCU design.


Features: 

  1. Ultra-small size.
  2. Support serial to WiFi
  3. Wireless transparent transmission.
  4. Long-distance transmission with ultra-low power.
  5. Support outboard antenna.
  6. Bearing high temperature to 125 ºC, compared to the 85ºC for ESP8266.
  7. Module size:24.5mm x 14mm.
  8. Derived from ESP8266, ESP8285 has a flash memory of 1MB
  9. Totally compatible with ESP8266
  10. WiFi support 802.11 b/g/n/e/i
  11. High temperature resistant, working temperature: -40℃-125℃

SOC characteristics:

  1. Built-in Tensilica L106 ultra-low power consumption 32-bit CPU,  the main frequency can be 80MHz and
  2. 160MHz,  also support RTOS;
  3. Built-in TCP/IP protocol stack;
  4. Built-in 1 channel 10-bit high precision ADC;
  5. The outside interfaces have HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO;
  6. The deep-sleep current is about 10uA, and the cut-off current is smaller than 5uA;
  7. Can be wake-up within 2 ms, and connect to transmit data package;
  8. the consumer power is smaller than 1.0mW (DTIM3) when at standby status;
  9. built-in 1M byte for SPI Flash.

Wi-Fi characteristics:

  1. Support 802.11 b/g/n/e/i
  2. Support three modes: Station, SoftAP, and SoftAP+STA;
  3. Support Wi-Fi Direct(P2P);
  4. Support hardware acceleration for CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4),
  5. API(SMS4), WEP(RC4), CRC;
  6. P2P find, P2P GO mode/GC mode and P2P power management;
  7. WPA/PA2 PSK and WPS;
  8. Support 802.11 i  security: pre-certification and TSN;
  9. Support 802.11n (2.4 GHz);
  10. 802.1h/RFC1042 frame encapsulation;
  11. Support seamless roam;
  12. Support AT remote updation and cloud OTA update;
  13. Support SmartConfig function for Android and iOS device SmartConfig.

Application:

  1. Serial Transparent transmission;
  2. WiFi probe;
  3. Smart power plug/Smart LED light;
  4. Mesh networks;
  5. Sensor networks;
  6. Wearable electronics;
  7. Security ID label;
  8. Wireless location recognition;
  9. Wireless location system beacon;
  10. Industrial wireless control.

Package Includes:

1 x DOIT Mini Ultra-Small size ESP-M3 Serial Wireless WiFi Transmission Module.

1 x Header Pins.

1 review for DOIT Mini Ultra-Small size ESP-M3 Serial WiFi Module Compatible with ESP8266

  1. Benedict

    Excellent, what a werbpage itt is! Thhis web siite presents useful facts
    to us, kep iit up.

    My webpagbe – Hubby jerks off whilea dark black manfucks his wife

Add a review

Your email address will not be published. Required fields are marked *