Plusivo Pi 4 Super Starter Kit without Raspberry Pi

Description

The Plusivo Pi 4 Super Starter kit is ideal for electronics enthusiasts and very useful for getting started with the Raspberry Pi development environment. In addition, thanks to the guide included for this kit, any enthusiast can start creating simple, or even complex projects, even if he has not used a development board before. For most sensors and components in the kit, detailed lessons and commented codes are available, so working with different sensors will become easier.

This mini-computer can also host a web server and has an internal memory of 32 GB where you can store files, web pages and others. Thus, a fairly simple project can take a whole new direction. For example, you can create a weather monitoring station and the information can be displayed on a web page, a phone app or you can store it in the internal memory at a certain interval of time.

Another project detailed in the guide is building a piano. You have the design of a piano in a web page and when a clape is pressed, on the buzzer you will hear the sound for a note. These are simple examples of what the Raspberry Pi 4 Model B can do.

Note: The Kit doesn’t include Raspberry Pi 4 Model B and 32 GB sd card with NOOBs

To get Raspberry Pi 4 Model B Click on the link below

Raspberry Pi 4 Model-B with 4 GB RAM

Raspberry Pi 4 Model-B with 2 GB RAM

 

 

---

Package Includes:

1 x 1 m HDMI – micro-HDMI cable

1 x 5V, 3 A Power Supply with USB type C output

5 x 5mm blue LEDs – 5pcs

5 x 5mm red LEDs – 5pcs

5 x 5mm yellow LEDs – 5pcs

5  x 5mm green LEDs – 5pcs

5 x 5mm white LEDs – 5pcs

1 x 5mm RGB LED with common cathode

11 sets of resistors with 10 pieces

10 x 10 Ω – 10pcs

10 x 100 Ω – 10pcs

10 x 150 Ω – 10pcs

10 x 220 Ω – 10pcs

10 x 330 Ω – 10pcs

10 x 1 kΩ – 10pcs

10 x 2 kΩ – 10pcs

10 x 5.1 kΩ – 10pcs

10 x 10 kΩ – 10pcs

10 x 100 kΩ – 10pcs

10 x 1 MΩ – 10pcs

1 x MPU6050 Accelerometer and Gyroscope

1 x Breadboard 830p

1 x L293D motor driver

1 x Set of 65 male-male jumper wires for breadboard

1 x 100 nF ceramic capacitor

1 x HC-SR04+ ultrasonic sensor

1 x 5 push buttons

1 x SG90 90° servomotor

1 x Photoresistor

1 x 4 NPN 2N2222 transistors;

1 x DHT11 Temperature and humidity sensor compatible with 3.3 V

1 x 2 1N4007 diodes

1 x 2 74HC595 shift registers

1 x 4 Digit 7 Segment display with common cathode

1 x Red Led Bar

1 x DC Motor

1 x Propeller

1 x 5 V relay

1 x Set of 10 20 cm male-female wires

1 x Passive buzzer