UDOO Neo Full IoT applications Development Board

6,679.00

Integrated 2D/3D graphics controller

Analogue camera connection supporting NTSC and PAL – 8-bit parallel camera interface

Fast Ethernet RJ45 – 10/100Mbps – Wi-Fi 802.11 b/g/n, Direct Mode SmartConfig and Bluetooth 4.0 Low Energy

Green Power Status LED – User Configurable LEDs (Red and Orange)

Integrated Sensors: 3-Axis Accelerometer – 3-Axis Magnetometer – 3-Axis Digital Gyroscope – 1x Sensor Snap-In I2C connector

Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields

Android Lollipop & Linux UDOObuntu2 (14.04 LTS)

Out of stock

SKU: RK000065 Categories: ,

Description

 

UDOO Neo Full IoT applications Development Board is the best, all-in-one solution for wireless applications. It is the most complete tool for wireless mobile IoT applications.

DOO Neo Full is an open-source Arduino Uno compatible single board computer. It is equipped with an NXP i.MX 6SoloX hybrid multicore processor composed of one ARM Cortex-A9 core running up to 1 GHz and one Cortex-M4 core running up to 227 MHz for high CPU performance and real-time response. Zephyr was ported to run on the Cortex-M4 core only. In a future release, it will also communicate with the Cortex-A9 core (running Linux) via OpenMP.

UDOO NEO FULL can be powered in three ways. You can use: 
  1. A standard 12 volts power supply, we recommend this one
  2. A Micro USB cable like the one we have in our USB Kit
  3. Any USB battery pack available on the market.


Features:

  1. Freescale i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 core
  2. Integrated 2D/3D graphics controller
  3. Analog camera connection supporting NTSC and PAL – 8-bit parallel camera interface
  4. Fast Ethernet RJ45 – 10/100Mbps – Wi-Fi 802.11 b/g/n, Direct Mode SmartConfig and Bluetooth 4.0 Low Energy
  5. Green Power Status LED – User Configurable LEDs (Red and Orange)
  6. Integrated Sensors: 3-Axis Accelerometer – 3-Axis Magnetometer – 3-Axis Digital Gyroscope – 1x Sensor Snap-In I2C connector
  7. Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields
  8. Android Lollipop & Linux UDOObuntu2 (14.04 LTS)
For detailed specification please refer to the Datasheet of the product.

Package Includes:

1 x UDOO Neo Full IoT applications Development Board

Reviews

There are no reviews yet.

Be the first to review “UDOO Neo Full IoT applications Development Board”

Your email address will not be published. Required fields are marked *