16 in 1 Sensor kit Compatible with Raspberry Pi 3 & Raspberry Pi 2 Model B

1,300.00

This kit contains 16 different most widely used sensor modules compatible with Raspberry Pi 3 & Raspberry Pi 2 Model B

Out of stock

SKU: RK000127 Category:

Description

If you are Raspberry pi user and frequency need various sensors to explore the all possible project with Raspberry Pi 3 & Raspberry Pi 2 Model B. Here is Sensor kit in which you will get 16 different sensors compatible with the raspberry pi.


Following is some brief info about sensors:

1.KY-008 laser sensor module

Operating voltage: 5V

Specifications: 15 * 24 mm

Light source wavelength: 650 nm

2.Obstacle avoidance sensor module

VCC: 3.3V-5V external voltage (can be directly connected to the 5v and 3.3v microcontroller MCU)

GND: External GND

OUT: Small board digital output interface (0 and 1)

Connection method: VCC-VCC; GND-GND; OUT-IO

Board size: 3.2 x 1.4cm

3.Flame sensor module

Operating voltage: 3.3V-5V

Output form: DO digital switching output (0 and 1) and AO analog voltage output

Size: 3.2cm x 1.4cm

Detect flame or wavelength range (approx): 760 nm to 1100 nm, lighter flame test distance is 80cm, the greater flame, the farther test distance

Detection angle is about 60 degree, particularly sensitive to flame photometry

Adjustable sensitivity

4.315M wireless transceiver module

Operating voltage: DC5V

Quiescent current: 4mA

Receiving frequency: 315MHz

Receiving sensitivity: -105DB

Size: 30 x 14 x 7mm

5.Emission head parameters

Transmission distance: 20-200 meter (different voltage, different effect)

Operating voltage: 3.5-12V

Dimension: 19 x 19mm

Work: AM

Transfer rate: 4KB / S

Transmitting power: 10mW

Transmission frequency: 315M

Pinout left → right: (DATA, VCC, GND)

6.One channel TCRT5000 tracing module

Detection distance: about 10mm

Operating voltage: 5V, black line output low level, white line output high level

7.Vibration sensor module

Operating voltage: 3.3V-5V

Output type: Digital switching output (0 and 1)

Small PCB board size: 3.2cm x 1.4cm

8.MQ-2 gas sensor module

Dimension: 32 x 22 x 27mm

The main chip: LM393, ZYMQ-2 gas sensor

Operating voltage: 5V DC

Dual signal output (analog output, and TTL level output)

TTL output valid signal is low level. (When the output low level signal light can be directly connected microcontroller)

Analog output: 0 ~ 5V voltage, the higher the concentration the higher the voltage.

9.Sound sensor module

Operating voltage: 3.3V-5V

Small PCB board size: 3.4cm x 1.6cm

10.DHT11 temperature and humidity sensor module

VDD: 3.3-5.5V DC

DATA: Serial data

NC: No connection

GND: Grounding, negative power supply

11.HC-SR04 ultrasonic sensor module

Operating voltage: 5V

Ultra-small quiescent current: less than 2mA

Induction angle: not more than 15 degrees

Detection distance: 2cm-400cm

High precision: up to 0.3cm

 


Package Includes:

1 x DS1302 RTC Real Time Clock Module (No Battery)

1 x SW-420 Normally Closed Vibration Sensor Module

1 x SW1801P 3pin Normally open vibration sensor module

1 x 315Mhz RF Wireless Transmitter and Receiver Kit

1 x Sound Sensor Module

1 x TCRT5000 Tracking Module

1 x KY-008 650nm Laser sensor Module 6mm 5V

1 x DHT11 Temperature and Humidity Sensor Module

1 x HC-SR501 PIR Motion Sensor Module Green

1 x HC-SR04 Ultrasonic Sensor 4pin

1 x MQ-2 Smoke Gas LPG Butane Hydrogen Sensor Module

1 x Soil Moisture Detection Humidity Sensor Module

1 x Raindrops Detection Sensor Module Snow RainWeather

1 x IR Infrared Flame Detection Sensor Module

1 x 3pin Photosensitive Sensor Module Light-Dependent Control

1 x Infrared Obstacle Avoidance Tracking Sensor Module

Reviews

There are no reviews yet.

Be the first to review “16 in 1 Sensor kit Compatible with Raspberry Pi 3 & Raspberry Pi 2 Model B”

Your email address will not be published. Required fields are marked *