GW Instek GSP 818 Spectrum Analyzer

Original price was: ₹199,999.00.Current price is: ₹177,089.00.

  1. Frequency Range: 9kHz ~ 1.8GHz
  2. RBW: 10Hz ~ 3MHz, 10Hz ~ 500kHz in 1-10 steps
  3. Sensitivity: -148dBm/Hz Typical @PreAmp On
  4. Built-in AM/FM Demodulation
  5. Bandwidth Zoom function
  6. Measurement Function: ACPR/OCBW/CHPW, NdB Bandwidth, Freq. Counter, Noise Marker, Limit Line
  7. Built-in 20dB Preamplifier Standard
  8. Interface: Lan, USB

Out of stock


The GW Instek GSP-818 is an RF spectrum analyzer at a very attractive price, which supports a frequency range from 9kHz to 1.8GHz and provides testing requirements for RF products during the development/production phases. The GW Instek GSP-818 has a built-in 20dB amplifier and provides an adjustable range of resolution bandwidth (RBW) from 10Hz to 3MHz. In addition, it has the AM/FM signal demodulation function and the ACPR/OCBW/CHPW test functions to meet the requirements of general RF signal measurement.

In addition, the built-in Time Spec function of GW Instek GSP-818 can simultaneously view the correlation between display power, frequency and time. The Bandwidth Zoom function can be used to view the spectrum performance of signals under different Span. The Limit Line function provides two different Limit Line settings: Windows Measure and Limit Line Measure. Users can use these functions for a wider range of measurement applications.

To achieve clearer signal observation, GW Instek GSP-818 utilizes a 10.4” large screen with SVGA (800 * 600) resolution. Pertaining to the communications interface, GW Instek GSP-818 provides both USB, LAN interfaces and VGA output. Via the USB Host, users can quickly retrieve the files saved after measurements. The USB Device and LAN interface allow users to control through the dedicated PC software or to use the required program designed by the corresponding commands.


  1. 1.8GHz spectrum analyzer
  2. Sensitivity is -148dBm/Hz typical at preamp on
  3. Built-in AM/FM demodulation
  4. Bandwidth zoom function
  5. ACPR/OCBW/CHPW, NdB bandwidth, frequency counter, noise marker, limit line functions
  6. Built-in 20dB preamplifier standard
  7. LAN and USB interface
  8. 10.4″ SVGA output (800*600) display

Package Includes:

1 x GW Instek GSP 818 Spectrum Analyzer

1 x Power cord

1 x Calibration certificate,

1 x CD (including quick start guide, User manual, Programming manual, PC software).


There are no reviews yet.

Be the first to review “GW Instek GSP 818 Spectrum Analyzer”

Your email address will not be published. Required fields are marked *