Sale!

HOT DD30CRTA Car, Lead Acid Battery, Charger 12V Charging, Device 3A Current 1-, 10000AH UPS Solar, Power Module, (With Terminal)

715.00

  1. Power supply voltage: 15-28VDC(Recommended 16-25VDC)
  2. Over  Charge Voltage is 14.8V
  3. Float Charge Voltage is 13.55V
  4. Maximum charge current: 3A
  5. Quiescent current: about 1.8mA
  6. High PWM Switching Frequency:300KHz
  7. Operating Ambient Temperature: -40℃ to +85℃
  8. Size: 66 x 20x 12mm
  9. Weight: 9g
SKU: RK002508 Categories: ,

Description

The DD30CRTA is a PWM switch-mode battery charger controller for a 12V lead-acid battery in a small package using a few external components. The DD30CRTA is specially designed for charging 12V lead-acid battery with trickle charge, constant current charge, over-charge and float charge mode. In over-charge and float charge mode, the regulation voltage is internally set.
The constant charge current is programmable with a single sense resistor.
 Deeply discharged batteries are automatically trickle charged at 17.5% of the programmed constant charge current until the cell voltage exceeds 75% of the regulation voltage in over-charge mode. The over-charge is terminated once the charging current drops to 38% of the constant charge current, then DD30CRTA will enter float charge mode. A new charge cycle automatically restarts if the battery voltage falls below 83.95% of the over-charge voltage in float-charge mode. DD30CRTA will automatically enter sleep mode when the input voltage is lower than the battery voltage.
Other features include under-voltage lockout and indication, etc.
1: The Regulation Voltage in Over Voltage Mode and Float Charge Mode
The regulation voltage VOC at BAT pin in overcharge mode is set at 14.8V(Typical) with ±1.5% accuracy.
In float charge mode, the regulation voltage VFLOAT at BAT pin is 91.57% of that in overcharge mode, which is 13.55V(Typical).
Trickle Charge Mode At the beginning of a charge cycle, if the battery voltage is below 75%×VOC, the charger goes into trickle
charge mode with the charge current set at about 17.5% of the constant current.
2: End-of-Over Charge Current
When the battery voltage approaches the over-charge voltage, the charger goes into the overcharge mode. In
overcharge mode, the charge current start to decrease and when the charge current drops to 38% of constant
charge current, the charger goes into float-charge mode.
3: Float Charge Mode
After the overvoltage charge is terminated, the charger goes into float charge mode. In float charge mode, the
battery voltage is regulated to 91.57%×VOC, namely 13.55V(Typical). Float charge mode can compensate for
the loss of battery power due to self-discharge or external loading.
4: Automatic Battery Recharge
In float mode, if both the battery and the input power supply (wall adapter) are present, a new charge cycle will
begin if the battery voltage drops below 83.95%×VOC due to self-discharge or external loading.
A new charge cycle can also be started manually by plugging off the input supply and reapplying it.

Application:

  1. Car battery charging
  2. Solar battery charging
  3. Loudspeaker
  4. Lead-Acid Battery Charger
  5. Electric Bicycle Charger
  6. UPS
  7. Portable Industrial and Medical Equipment
  8. Standalone Battery Chargers

Features:

  1. Fixed Over-Charge Voltage
  2. Overcurrent protection
  3. Automatic Conditioning of Deeply Discharged Batteries
  4. Automatic Recharge
  5. Charger Indication
  6. Battery Overvoltage Protection
  7. Suitable for 1-10000AH 12V Lead-Acid Battery charger

Package Includes:

1 x HOT DD30CRTA Lead Acid Battery Charger 12V Charging Device 3A

Reviews

There are no reviews yet.

Be the first to review “HOT DD30CRTA Car, Lead Acid Battery, Charger 12V Charging, Device 3A Current 1-, 10000AH UPS Solar, Power Module, (With Terminal)”

Your email address will not be published. Required fields are marked *